SEM161W/H - Wall Mount Humidity Transmitters:
The SEM161 is a “smart” humidity transmitter sensor with a single or dual (SEM162) two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available. Available in Wall or Duct Mount.
SEM161R/162R - Remote Mount Humidity Transmitters: The SEM161/162 is a “smart” humidity transmitter sensor with a single or dual (SEM162) two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available.
Measurement instrument for relative humidity and temperature in rooms and ducts in HVAC plants. The combination of state-of-the-art sensor technology and functionality makes this device to a versatile solution for various applications.
The StatMaxx is a state-of-the-art hygro/thermostat for effective control applications for relative air humidity and air temperature. The configuration is made by 3 front buttons and an intuitive menu structure directly on the device. The alarm and control function drive an integrated relay switch for turn on/off an heater or humidifier.
The TempMaxx is a precision measurement instrument with integrated control functions for the detection of temperature with external resistor sensors. The large displays, intuitive menu structure as well as the possibility to connect various sensors make this device extremely versatile for almost all industrial applications
The CIC-Touch display panel with color touch-screen has been designed for the flush mounting in walls, e.g. clean room walls. Various interfaces allow an easy integration in existing networks as well as a direct connection to external environment sensors.
The SEM160i is a low cost single/dual channel RH and temperature transmitter for industrial and BMS/HVAC applications.
The unit can be supplied in single or dual channel ( two wire (4 to 20) mA ) versions, the single channel version has a thermistor
mounted in the sensor tip for direct temperature sensing by the users.
A USB HID interface is provided for user configuration using USBSpeedLink configuration software, allowing the user to select signal
source and range for each channel.
The dual channel version has four switch set ranges for easy onsite configuration. The four ranges can be programmed individually to
the customer’s requirement off site via the configuration software.
Single point alignment is provided for both temperature and humidity ranges.
The configuration software also provides data readings together with a basic logger function for diagnostics.
Wall and duct mount versions are available.