The temperature controller N1020 features advanced performance capability for the most complex and critical applications. Based on a high-end microprocessor and designed with a sophisticated auto-adaptive PID algorithm it continuously adjusts the PID parameters for best controlling performance. The programmable input, configurable dual output along with the full range power supply provide maximum flexibility in application. This 1/32 DIN size instrument has extremely small front dimensions of only 48x24 mm or 1/32nd DIN and is the right choice for controlling laboratory equipment when panel space is reduced.
The N320 is a temperature meter that provides you in the frontal display the measured temperature of the sensor connected to its terminals. The temperature sensors available are NTC Thermistor, Pt100, Pt1000 and J, K, T type thermocouple, with offset correction capability.
The features of a particular model (input sensor type, sensor range, mains supply, etc) are identified by the label placed on the thermometer body.
Cooling and Heating Temperature Controller N321
The N321 temperature controller are used to measure, indicate and control temperature in many different systems. Accepts 4 sensors types: Pt100, Pt1000, NTC or Thermocouple J. The user can program the control action according to the application: direct action (refrigeration) or reverse action (heating). The internal 10 A relay can directly switch compressors or electrical heaters with ON/OFF control.
Differential temperature controller N321S
The N321S is a controller intended for solar water heating applications. It controls the water circulation system based on the difference of temperature between the solar collector and the storage tank (or swimming pool).
The instrument contains two NTC-type temperature sensors and a control output for activating the water circulation pump. It provides protections against overheating and freezing to the piping, preventing damages to the system.
2-Output Temperature Controller N322
Digital temperature controller for heating and refrigeration purposes with 2 independent set points. It has PT100, Pt1000, thermistor NTC, PTC or J thermocouples inputs available.
Humidity and Temperature Controller N322RHT
The 322RHT is a digital controller for relative humidity and temperature. Its 2 relay outputs can be configured independently as control or alarm, either for temperature or relative humidity. The RHT probe (3 m length) is provided along with the instrument.
The features of a particular model (mains supply, digital communication, etc) are identified by the label placed on the thermostat body.
Universal Controller N1100
It holds in one single instrument all the major features that are needed for the vast majority of industrial processes. Both input and output are selected through the front keyboard without hardware change.
Universal Process Controller N1200
N1200 is an advanced self-adaptive PID controller with an algorithm that constantly monitors the process performance and adjusts PID settings in order to always obtain the best possible control response.
A single model is able to accept most industrial sensors and signals and provides all output types required to control different processes.
All controller configuration can be achieved from the front panel without performing any hardware change.
The multi-purpose inputs and outputs can be combined to provide tremendous versatility with extremely high accuracy in the most demanding applications.
The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another important innovation is the exclusive removable wiring connection block which translates into ease of use during installation process. It accepts Pt100 RTDs and thermocouples types J, K and T and features two outputs for control and alarm, universal power supply and automatic tuning of the PID paramenters. The N1040 is set to be the lowest cost temperature controller in the market while keeping high performance standards.
N1500 Universal Indicator
The N1500 series of Universal Process Indicators are high performance instruments used for monitoring analog signals in the vast majority of industrial and laboratory processes.
Configuration from the front panel is fast and easy, accepting thermocouples, Pt100 and 4-20 mA or voltage signals without any hardware change.
The basic version comes with key panel programmable range, selectable decimal point, universal switching power supply, 24 Vdc output for field transmitters excitation, ultra bright five digit LED display and 2 relay alarms with 6 function options. 4 to 20 mA output for retransmission of measured variable to a recorder or PLC, two extra alarm relays, 1 digital input, RS485 digital communication interface and 10 Vdc output for load cell excitation are available as options.
This high performance universal digital panel meter features a bright 56 mm high display for high visibility at long distances. Setup can be done via its keyboard or via a remote PC since it features RS485 comm and a digital input with special functions.
The temperature controller N1020 features advanced performance capability for the most complex and critical applications. Based on a high-end microprocessor and designed with a sophisticated auto-adaptive PID algorithm it continuously adjusts the PID parameters for best controlling performance.
The programmable input, configurable dual output along with the full range power supply provide maximum flexibility in application.
This 1/32 DIN size instrument has extremely small front dimensions of only 48x24 mm or 1/32nd DIN and is the right choice for controlling laboratory equipment when panel space is reduced.
6-Digit Electronic Counter 1/16 DIN - NC400-6
NC400-6 is an advanced 6-digit counter that also performs batch and totalizer counting operations. It has two outputs with independent and configurable presets that can be triggered based on counting, batch or totalization values. Its 2 outputs allow for an independent timed triggering.
The counting inputs can be configured to connect dry-contact, voltage pulse, NPN or PNP sensors. Sensors may be powered by an internal power supply.
Counting mode can be configured as progressive, regressive, quadrature, sum or subtraction. Several reset modes - automatic or manual - can be configured. Manual reset can be generated by a digital input or key from the front panel.
Programmable Timer NT240
With a 4 digit display, this timer offers a relay output to be switched at pre-programmed intervals according to eleven different timing functions. The LED display shows the running time and the digital inputs execute start, hold and reset funstions. Dimensions: 48x48mm x 100mm (1/16 DIN).